Related products
Ads
✕
Learn how your ads are chosen
Product added to your wishlist! View wishlist
Sign in to see your saved products on any device
Product removed from your wishlist! View wishlist
Sign in to see your saved products on any device
Something went wrong. Please try again later.
Product is added to compare already. Please refresh the page.
Product is not found in compare. Please refresh the page.
5 Products already added. Please delete existing selection to add this.
Share this product
Eastwood Interstate Black Single Stage Automotive Car Paint Urethane Quart Kit
This product ad may change over time
ShareEastwood Interstate Black Single Stage Automotive Car Paint Urethane Quart Kit
Eastwood Interstate Black - The deepest, darkest, blackest black available.Ultra jet black pigments are finely ground and processed for extra time for maximum color development. Available only in single-stage, which is the best way to achieve a miles-deep appearance suitable for the most high-end refinish and restoration projects. Eas…
Eastwood Interstate Black - The deepest, darkest, blackest black available.Ultra jet black pigments are finely ground and processed for extra time for maximum color development. Available only in single-stage, which is the best way to achieve a miles-deep appearance suitable for the most high-end refinish and restoration projects. Eastwood Interstate Black has a gloss level of 95%+ which makes it the highest gloss black paint available with a super wet and deep shine. Eastwood's premium Single-Stage Acrylic Urethane Topcoat provides exceptional long-lasting beauty and durability. Catalyzed urethane for unsurpassed durability; Highly resistant to UV rays, chemicals, chips; Makes 1 sprayable quart when mixed 3:1 with a required activator; Approximate coverage: 30 SQ FT;Max Temperature: Paint will handle up to 300 degrees without delamination, but color shift may occur, so it should not be used in a high heat settingThis premium 2-component topcoat system is blended with top-quality raw materials and advanced composition coatings technology. Superior to acrylic, alkyd and lacquer coatings. Eastwood's single-stage urethane paints hold their gloss longer and won't yellow. SINGLE-STAGE PAINT MIXING RATIOSThoroughly mix three parts single-stage urethane paint with one part Activator. No additional reduction is required but can be used as needed.Use caution in mixing materials as Eastwoods single-stage urethane paint may begin to gel after approximately two hours (at 70 F). PAINT GUN SET-UPHVLP Gun: Fluid Tip 1.3-1.5 mm Inlet Spray Pressure 25-30 psi Conventional Gravity: Fluid Tip 1.3-1.6 mm Inlet Spray Pressure 45-50 psi Conventional Siphon: Fluid Tip: 1.4-1.8 mm Inlet Spray Pressure 45-50 psiAPPLICATION INSTRUCTIONSApply single-stage urethane paints in two to three medium wet coats as necessary to achieve sufficient coverage, allowing ten minute flash between coats. Additional coats may be necessary to achieve total coverage for some metallic colors. A final fog coat may be applied with metallic colors to help set an even flake pattern and /or adjust flake orientation. A dry film thickness of approximately 2 mil is recommended. Paint should be dust free within 10-15 minutes and tack-free within one hour (at 70 F). Re-coat anytime after the previous coat has flashed, or before 18 hours. After 18 hours, paint should be abraded prior to re-coating for proper adhesion purposes. This urethane paint may be applied as a stand-alone single-stage system, or in combination with Eastwoods High Solids Urethane Clear as a basecoat/clearcoat system. Additionally, Urethane Clear may be integrated into Urethane color. When combining the two systems, be sure to activate each side (the paint and the clear) separately, with their own activators at the correct mix ratios, before blending. When used as a Single-Stage Urethane Paint, this coating may be wet-sanded and polished for increased depth and gloss like any other urethane topcoat. Care should be taken when lightly cutting metallic colors to prevent disturbing aluminum flake.
More related products
Ads
✕
Learn how your ads are chosen
Eastwood Company | Eastwood Auto Supplies
AdWe Care About Your DIY Automotive Projects and Want You To Be 100% Satisfied. America’s Favorite DIY and Auto Body Website.Site visitors: Over 10K in the past monthHigh Performance · Powder Coating · Quick Setup · Power Tools
Description
Eastwood Interstate Black - The deepest, darkest, blackest black available.Ultra jet black pigments are finely ground and processed for extra time for maximum color development. Available only in single-stage, which is the best way to achieve a miles-deep appearance suitable for the most high-end refinish and restoration projects. Eastwood Interstate Black has a gloss level of 95%+ which makes it the highest gloss black paint available with a super wet and deep shine. Eastwood's premium Single-Stage Acrylic Urethane Topcoat provides exceptional long-lasting beauty and durability. Catalyzed urethane for unsurpassed durability; Highly resistant to UV rays, chemicals, chips; Makes 1 sprayable quart when mixed 3:1 with a required activator; Approximate coverage: 30 SQ FT;Max Temperature: Paint will handle up to 300 degrees without delamination, but color shift may occur, so it should not be used in a high heat settingThis premium 2-component topcoat system is blended with top-quality raw materials and advanced composition coatings technology. Superior to acrylic, alkyd and lacquer coatings. Eastwood's single-stage urethane paints hold their gloss longer and won't yellow. SINGLE-STAGE PAINT MIXING RATIOSThoroughly mix three parts single-stage urethane paint with one part Activator. No additional reduction is required but can be used as needed.Use caution in mixing materials as Eastwoods single-stage urethane paint may begin to gel after approximately two hours (at 70 F). PAINT GUN SET-UPHVLP Gun: Fluid Tip 1.3-1.5 mm Inlet Spray Pressure 25-30 psi Conventional Gravity: Fluid Tip 1.3-1.6 mm Inlet Spray Pressure 45-50 psi Conventional Siphon: Fluid Tip: 1.4-1.8 mm Inlet Spray Pressure 45-50 psiAPPLICATION INSTRUCTIONSApply single-stage urethane paints in two to three medium wet coats as necessary to achieve sufficient coverage, allowing ten minute flash between coats. Additional coats may be necessary to achieve total coverage for some metallic colors. A final fog coat may be applied with metallic colors to help set an even flake pattern and /or adjust flake orientation. A dry film thickness of approximately 2 mil is recommended. Paint should be dust free within 10-15 minutes and tack-free within one hour (at 70 F). Re-coat anytime after the previous coat has flashed, or before 18 hours. After 18 hours, paint should be abraded prior to re-coating for proper adhesion purposes. This urethane paint may be applied as a stand-alone single-stage system, or in combination with Eastwoods High Solids Urethane Clear as a basecoat/clearcoat system. Additionally, Urethane Clear may be integrated into Urethane color. When combining the two systems, be sure to activate each side (the paint and the clear) separately, with their own activators at the correct mix ratios, before blending. When used as a Single-Stage Urethane Paint, this coating may be wet-sanded and polished for increased depth and gloss like any other urethane topcoat. Care should be taken when lightly cutting metallic colors to prevent disturbing aluminum flake.
Specifications
| Formula | 2-component topcoat system, blended with top-quality raw materials and advanced composition coatings technology, single-stage urethane paint with activator |
| Coverage area | 30 SQ FT |
| Material | Acrylic urethane |
| Durability | Catalyzed urethane, highly resistant to UV rays, chemicals, chips |
| Drying Time | Dust free within 10-15 minutes, tack-free within one hour |
| Brand | Eastwood |
| Compatibility | Eastwood's High Solids Urethane Clear, Urethane Clear, Activator |
| Finish | Glossy, 95%+ gloss level |
| Resistance | Highly resistant to UV rays, chemicals, chips; paint will handle up to 300 degrees without delamination, but color shift may occur |
| Color | Interstate Black |
| Form | Liquid |
| Package Quantity | Quart kit |
| Package Contents | One quart of single-stage urethane paint, one quart of activator |
| Application Method | Paint gun |
| Application | Spray |
| Number of Coats Required | Two to three medium wet coats as necessary to achieve sufficient coverage |
| Features | Ultra jet black pigments, highest gloss black paint available, super wet and deep shine, exceptional long-lasting beauty and durability, can be wet-sanded and polished for increased depth and gloss, can be used as a stand-alone single-stage system or in combination with Eastwood's clear coats, can be applied with metallic colors to help set an even flake pattern and/or adjust flake orientation. |
| Coverage | 30 SQ FT |
| Protection | Highly resistant to UV rays, chemicals, chips |
| Quantity | One kit |
| Purpose | Refinish and restoration projects |
| Product features | Ultra jet black pigments, highest gloss black paint available, super wet and deep shine, exceptional long-lasting beauty and durability, can be wet-sanded and polished for increased depth and gloss, can be used as a stand-alone single-stage system or in combination with Eastwood's clear coats, can be applied with metallic colors to help set an even flake pattern and/or adjust flake orientation. |
Feedback